HP XP P9500 Storage - Manual (Page 119)

Description Error code (SSB2)
A request of Cnt Ac-J Z Paircreate was received. However, the pair could not share the volume
with Continuous Access Synchronous Z because the Cont Access Journal 3DC &+ 4x4 Open MF
program product was not installed in the primary system. 3729
A pair cannot be created because the secondary system does not support the combination of
multiple primary and secondary systems. 372B
The volume is inaccessible because the P-VOL is blocked. 372C
The specified volume is used in the system that consists of multiple primary and secondary systems.
Therefore the command was rejected because the delta resync operation cannot be executed. 372D
A request to create or resynchronize a pair in the system that consists of multiple primary and
secondary systems was rejected because the Cont Access Journal 3DC + 4x4 Open MF program
product was not installed in the primary system. 372E
In a 3 Cnt Ac-J Z DC configuration, the pair could not be created because the pair status of one
of the mirrors is not fixed. 3737
A request for pair creation was rejected because the Cont Access Journal 3DC + 4x4 Open MF
program product was not installed in the primary storage system. 3738
A request for pair creation in the second mirror of a 3 Cnt Ac-J Z DC configuration was rejected
because the journal to which the P-VOL belongs does not allow the 3 Cnt Ac-J Z DC configuration. 3739
A request for pair creation in a 3 Cnt Ac-J Z DC configuration was received, but the command
was rejected because the S-VOL was used by another program product. 373D
The pair creation failed because the status of a mirror in the journal in which the specified S-VOL
belongs is other than Initial or Stopped. 373E
A request for pair creation in a 3 Cnt Ac-J Z DC configuration was rejected because the P-VOL
was used by another program product. 3744
A request for pair creation jn 3 Cnt Ac-J Z DC cascade configuration between the primary and
intermediate sites was rejected because the journal to which the P-VOL belongs does not allow
the 3 Cnt Ac-J Z DC configuration. 3745
The pair cannot be created because the specified P-VOL is used for the external volume mapped
for online data migration. 374B
A request for pair creation in a 3 Cnt Ac-J Z DC configuration was rejected because the command
was for creating a delta pair, which is not supported by Cnt Ac-J Z. 3753
The command was rejected because the specified S-VOL is used as an S-VOL in another mirror,
and the pair status is not in SSWS status. 3755
The pair cannot be created because the secondary storage system does not support the Path Gr.
ID, which was specified as other than 0. 3756
Paircreate or Pairresync is not available, because the specified journal is dedicated to a Cnt
Ac-J-Cnt Ac-S combination (2DC), and the MU# is 0. 8C13
The pair cannot be created because the specified CTG number is out of range of supporting. 8C19
The pair cannot be created or resynchronized because the specified journal number is incorrect. 8C1A
The pair cannot be created because the specified journal number is out of range of supporting. 8C1B
The pair cannot be created because of the one of following reasons: 8C1E
•
The microcode version of the specified primary storage system does not support connection
with the specified secondary storage system.
•
The specified primary storage system does not support connection with the specified secondary
storage system
The request to update options was rejected because the specified journal number or mirror ID is
incorrect. 8C20
The pair cannot be created because the specified volume was an external volume. 8F00
Troubleshooting with RAID Manager 119