Resume dialog box – HP XP P9500 Storage User Manual
Page 176
Description
Item
Options for handling update data that has not been copied to the S-VOL. The default is Flush:
Suspend Mode
•
Flush: Update data is copied to the S-VOL.
•
Purge: Update data is not copied to the S-VOL.
Applies the settings to the Preview list in the Pair Operation window.
Set
Discards the settings and closes the dialog box.
Cancel
Resume dialog box
Use this dialog box to resynchronize a pair.
See
for complete information.
Description
Item
The restore range. The default is Volume if two or more pairs in the same mirror are selected.
Otherwise, the default is Mirror.
Range
•
Volume: Resumes only the specified pairs.
•
Mirror: Resumes all pairs in the specified pairs’ mirror.
Specify the desired priority (1-256) (scheduling order) for the pair-restoring operations. If Range
is Mirror, you cannot change the Priority option.
Priority
Indicates the followings about a remote system.
DKC
•
The serial number with the LDKC number.
•
The controller ID with the model name.
•
ID (Path Gr. ID)
•
The path type.
Indicates the processing after recovery of the pairs.
Resync Mode
•
Normal: Split pair whose status is PSUS or PSUE is recovered.
•
Delta: Delta resync operation is performed.
•
Return to standby: The status of pairs is recovered from HLDE to HOLD.
Options for splitting pairs when a failure occurs.
Error Level
•
Mirror: All pairs in the failed pairs’ mirror are split.
•
Volume: Only the failed pair is split.
If Range is Mirror, Error Level cannot be changed.
Applies the settings to the Preview list in the Pair Operation window.
Set
Discards the settings and closes the dialog box.
Cancel
176
GUI reference