HP XP P9500 Storage - Manual (Page 61)

procedure. If you cancel logical path settings, you will be unable to perform operations and
check status.
Also, operations involving logical paths cannot be performed when changing the microcode.
Make sure the microcode change completes before performing operations involving logical
paths.
Procedure 5 To set up Cnt Ac-J Z, define logical paths
1. In the Remote Web Console main window, select Actions > Remote Copy > Continuous Access
Journal Z > DKC Operation.
2. In the DKC Operation window, click to change the mode from View to Modify.
3. In the Display box, select DKC.
4. In the remote system list on the right-side, right-click and select DKC Operation > Add DKC.
5. In the S/N box, enter the remote system’s 5-digit serial number.
Configuring local and remote systems for Cnt Ac-J Z 61