HP XP P9500 Storage - Manual (Page 120)

Description Error code (SSB2)
The command was rejected because an internal logical error occurred. 8F04
The pair cannot be created because the specified P-VOL is one of the following: 8F10
•
A BC Z S-VOL that is not in split/SUSPOP status
•
A BC Z volume in Reverse Copy status
• A BC Z reserved volume
•
A Compatible FlashCopy volume
The pair cannot be created. The processing of volume migration could not be stopped because
the P-VOL was being migrated by Auto LUN. 8F11
The pair cannot be created because the specified volume was the reserved volume. 8F14
The pair cannot be created because the specified volume was in the state of online from the host. 8F17
The pair cannot be created because the specified volume was used in a pair on another program
product. 8F18
The pair cannot be created because the emulation type of the specified volume was unusable. 8F19
The pair cannot be created because the specified P-VOL was not in the Simplex status. 8F1B
The pair cannot be created because the specified P-VOL was not in the Suspend status. 8F1C
The pair cannot be created or resynchronized because of the one of following reasons. 8F21
•
The specified volume was the P-VOL of the Continuous Access Synchronous Z.
•
The unavailable configuration with the combination of the Business Copy Z (including when
the mirror ID of the Cnt Ac-J Z was 0).
• Unavailable configuration of the status transition.
The pair cannot be created because a path between the devices was not created. 8F24
The pair cannot be created or resynchronized because PIN was existed in the specified volume. 8F25
The pair cannot be created or resynchronized because it could not access to the specified P-VOL
or S-VOL. 8F28
The pair cannot be created because the specified master journal was unusable. 8F29
The Cnt Ac-J Z pair cannot be created nor restored because of the one of following reasons. 8F2A
• The specified P-VOL is used by Compatible FlashCopy.
•
The specified P-VOL is TSE-VOL or being used by Compatible FlashCopy SE.
The pair cannot be created because the protect attribute of the Data Retention was set for the
specified P-VOL. 8F2B
The pair cannot be created because the specified volume was used in a pair on the Continuous
Access Synchronous Z or the Business Copy Z. 8F33
The pair cannot be created because the specified volume was blocked. 8F35
The following programs for Mainframe systems might not be installed, or the licenses of them
might be expired. Please confirm settings for: 8F38
•
Continuous Access Synchronous Z
• Continuous Access Journal Z
The pair cannot be created because the program product of Cnt Ac-J Z was not installed. 8F39
The pair cannot be created because cache CL2 is in abnormal status. 8F46
The pair cannot be created because cache CL1 is in abnormal status. 8F47
120 Troubleshooting