HP Storage Mirroring V5.1 Software - Manual (Page 184)

20 - 5

Full—All files are sent to the target.

Server Shutdown Timeout—This setting indicates the amount of time, in seconds, for the
service to wait prior to completing a shutdown so that Storage Mirroring can persist data on the
target in an attempt to avoid a remirror when the target comes back online. A timeout of zero (0)
indicates waiting indefinitely and any other number indicates the number of seconds. The timeout
setting only controls the service shutdown from the Storage Mirroring clients. It does not control
the service shutdown through a reboot or from the Service Control Manager.
Network
The Network tab contains settings that control network communications. Any changes made to this
tab will not take effect until the Storage Mirroring service has been restarted on the server.

Default Address—On a machine with multiple NICs, you can specify which address is the default
address when a connection is established. It can also be used on machines with multiple IP
addresses on a single NIC.

Communications port—Storage Mirroring servers use this port to send and receive commands
and operations between two Storage Mirroring servers.
NOTE: Database applications may update files without changing the date, time, or file size.
Therefore, if you are using database applications, you should use the File
Differences with checksum or Full option.