HP Storage Mirroring V5.1 Software - Manual (Page 158)

19 - 22
5506 Service Warning One or more required e-mail
settings have not been specified
(error code: %1).
At a minimum, you must specify
the e-mail server, the From and
To addresses, and at least one
type of event to include.
5507 Service Warning E-mail notification could not be
initialized. Check to make sure
WMI is installed and available
(error code: %1).
If you are using Storage
Mirroring 4.4.2.1 or earlier and
Windows NT 4.0, e-mail
notification requires Windows
Management Instrumentation
(WMI) to be installed. Verify that
you have it installed on the
Storage Mirroring server.
5508 Service Warning An error occurred connecting to
the WMI namespace. Check to
make sure the Windows
Management Instrumentation
service is not disabled (error
code %1).
This alert occurs if there is an
error with the Windows
Management Instrumentation
(WMI) service. Verify that you
have it installed on the Storage
Mirroring server and that it is
enabled.
5600 Service Warning Part or all of the e-mail setting
%1 is not in a valid format.
Verify that the include
categories and exclude ID list
are identified and formatted
correctly.
7106 RepDrv Error The driver was unable to get
valid name information from the
Filter Manager for the file %2.
(Filename may be truncated.) It
cannot be replicated. Please
contact technical support.
Contact technical support.
7107 RepDrv Error The driver was unable to get
valid name information from the
Filter Manager for a file. It
cannot be replicated. Please
contact technical support.
Contact technical support.
8100 RepDac Error The driver encountered an
unrecoverable internal error.
Contact technical support. The
last Word in the Data window is
the internal error code.
Contact technical support.
8192 Resources Error Driver failed to allocate Kernel
memory. Replication is stopped
and server must be rebooted for
replication to continue. The last
word in the data window is the
tag of the allocation that failed.
Reboot the server and contact
technical support if this event
occurs again.
8192 RepDrv Error Kernel memory is exhausted.
Replication is stopped. This may
have been caused by low system
resources.
Reboot the server and contact
technical support if this event
occurs again.
8193 System Error The driver failed to create a
thread required for normal
operation. This may have been
caused by low system
resources. Reboot your server
and contact technical support if
this error occurs again. The last
Word in the Data window is the
NT status code.
Reboot the server and contact
technical support if this event
occurs again.
8196 RepDrv Warning The maximum amount of
memory for replication queuing
has been reached. Replication is
stopped and memory is being
freed.
Contact technical support if this
event occurs again.
ID Category Severity Event Message Required Response