HP Storage Mirroring V5.1 Software - Manual (Page 60)

8 - 6
h. Specify your Storage Mirroring bandwidth limiting parameters.

No Bandwidth Limit—Data will be transmitted using all available bandwidth.

Fixed Bandwidth Limit—Data will be transmitted according to the user-specified
bandwidth configuration. By default, the Unlimited checkbox is enabled. This
configuration is identical to selecting No Bandwidth Limit. If you want to limit your
bandwidth usage, clear this checkbox. To limit the bandwidth usage, enter the maximum
amount of data you want to transfer per second. You can indicate it by specifying your
Connection Speed and the Percentage of the bandwidth that you want to use or by
entering the Transfer Rate value directly.
i. Click Next to continue.
j. Specify your Storage Mirroring orphan file parameters. By default, the orphan files feature is
disabled. To enable it, select Move/Delete Orphan Files. Specify if you want to delete or
move the files. If you select the move option, identify the location where these orphan files
will be located. Click Next to continue.
k. Specify your Storage Mirroring compression parameters. By default, compression is disabled.
To enable it, select Enable Compression. Depending on the compression algorithms
available for your operating system, you may see a slider bar indicating different
compression levels. Set the level from minimum to maximum compression to suit your
needs.
l. Click Finish to complete the creation of the Double-Take Source Connection resource.
8. Bring the Double-Take Source Connection resource and the virtual server resources online.