Storage mirroring server ports, Storage mirroring server ports -7 – HP Storage Mirroring V5 Software User Manual
Page 29
2
-
7
Storage Mirroring server ports
The Storage Mirroring daemon uses three ports for Storage Mirroring communications.
Service Listen Port
—The Storage Mirroring server uses this port to listen for commands from other Storage Mirroring
servers.
Heartbeat Transmit Port
—The Storage Mirroring server uses this port to transmit heartbeats.
Status Listen Port
—The Storage Mirroring server uses this port to listen for requests to update at-a-glance monitoring
from the Storage Mirroring Management Console.
1.
Right-click a machine on the left pane of the Management Console and select
Properties
.
2.
On the
Network
tab, modify the
Service Listen Port
,
Heartbeat Transmit Port
and/or the
Status Listen Port
and
specify the number that you want to assign to the ports. The default values are 1500, 1500 and 1505, respectively. The
valid values are
1025
to
65535
.
3.
Click
OK
to save the settings.
NOTE:
You must stop and restart the Storage Mirroring daemon for this change to take effect.