HP Storage Mirroring V5 Software - Manual (Page 152)

11 - 18
7. To remove an IP address from an established monitor, use the monitor remove command.
8. Configure the failover settings by using the monitor option command.
Command MONITOR REMOVE
Description Removes an IP address that is currently being monitored
Syntax MONITOR REMOVE < IP_address > [ monitor ]
Options ‹ IP_address —The currently monitored IP address that should be removed
‹ monitor —Name of the source machine designated as the monitor
Examples ‹ monitor remove 205.31.2.57 indy
‹ monitor remove 205.31.2.68
Notes ‹ If you do not specify a monitor, the current source designated as the monitor will be used. If you
have not identified a monitor, you will receive an error message stating that a monitor has not
been selected.
‹ Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command MONITOR OPTION
Description Configures the settings to determine how failover will be performed
Syntax MONITOR OPTION [MOVENAME | NOMOVENAME] [MOVEADDRESSES | NOMOVEADDRESSES]
[MOVESHARES | NOMOVESHARES] [ADD | REPLACE]
[, USESHAREFILE | NOUSESHAREFILE][, FAILONE | FAILALL]
[, TRIGGERONE | TRIGGERALL] [, FODELAY | NOFODELAY] [, FBDELAY | NOFBDELAY]
[, INTERVENTION | NOINTERVENTION] [
monitor ]