HP Storage Mirroring V5 Software - Manual (Page 154)

11 - 20
9. Specify any scripts by using the monitor script add command.
Command MONITOR SCRIPT ADD
Description Specifies the scripts that should be run during the failover and failback processes
Syntax MONITOR SCRIPT ADD < type > < script_name > [ monitor ]
Options ‹ type —Any of the following script types:
‹ PREFAILOVER —Specifies that the file is a pre-failover script to be run on the target before
failover occurs
‹ POSTFAILOVER —Specifies that the file is a post-failover script to be run on the target after
failover occurs
‹ PREFAILBACK —Specifies that the file is a pre-failback script to be run on the target before
failback occurs
‹ POSTFAILBACK —Specifies that the file is a post-failback script to be run on the target after
failback occurs
‹ SRCPOSTFAILBACK —Specifies that the file is a post-failback script to be run on the source
after failback occurs
‹ script_name —Full path and name of the script file
‹ monitor —Name of the source machine designated as the monitor
Examples monitor script add prefailback “/home/username/prefailback”
Notes ‹ If you do not specify a monitor, the current source designated as the monitor will be used. If you
have not identified a monitor, you will receive an error message stating that a monitor has not
been selected.
‹ Options that contain non-alphanumeric characters must be enclosed in quotation marks.