HP Storage Mirroring V5 Software - Manual (Page 98)

8 - 2
Managing Replication Through the Management Console
Using the Management Console, replication can be initiated upon connection, manually controlled, and monitored. In addition,
task commands can be inserted in the replication queue.
Initiating replication upon connection
1. There are four methods available for establishing a connection and opening the Connection Manager:
‹ Highlight a replication set and select Tools , Connection Manager .
‹ Right-click on a replication set and select Connection Manager .
‹ Drag and drop a replication set to a target machine on the left pane of the Management Console.
‹ Highlight a replication set and then drag and drop the replication set to a target machine on the right pane of the
Management Console.
The Connection Manager will open and the Servers tab will be selected.
2. Complete the Servers tab entries as described in Establishing a new connection on page 6-6.
3. Verify that the Start Replication on Connection check box is selected. If replication is not initiated when the connection
is established, data integrity cannot be guaranteed.
4. Click Connect when you are finished.
NOTE: Other tabs are available in the Connection Manager to set advanced connection settings. To establish a
connection, you do not need to make modifications to these tabs; a connection can be established with the
default settings. For more information on these advanced settings, see the chapter that corresponds with the
tab name. For example, for information on the verify tab, see
Verification on page 9-1.