HP Storage Mirroring V5 Software - Manual (Page 198)

13 - 30
Connection conState The state of the active connection
0 —Error. This indicates a connection that is not transmitting because something has
gone wrong (for example, lost connection).
1 —Active. This indicates that the connection is functioning normally and has no
scheduling restrictions imposed on it at this time. (There may be restrictions, but it is
currently in a state that allows it to transmit.)
2 —Paused. This indicates a connection that has been paused.
3 —Scheduled. This indicates a connection that is not currently transmitting due to
scheduling restrictions (bandwidth limitations, time frame limitations, and so on).
4 —None. This indicates a connection has not been established. Statistics are still
available for the source and target machines.
conOpsIn
Cmd
Queue The number of operations waiting to be executed on the target
conOpsIn
AckQueue The number of operations waiting in the acknowledgement queue. Each operation
that is generated receives an acknowledgement from the target after that operation
has been received by the target. This statistic indicates the number of operations that
have yet to receive acknowledgement of receipt.
conOpsIn
RepQueue The number of replication operations currently waiting to be executed on the target
conOpsIn
MirQueue The number of mirror operations currently waiting to be executed on the target
conBytesInRepQ
ueue The number of replication bytes remaining to be transmitted to the target
conOpsTx The number of operations transmitted to the target. This is the total number of
operations that Storage Mirroring has transmitted as a source. In other words, the
cumulative number of operations transmitted by this source to all connected targets.
conBytesInMirQ
ueue The number of mirror bytes remaining to be transmitted to the target
conBytes
Tx The number of bytes transmitted to the target. This is the total number of bytes that
Storage Mirroring has transmitted as a source. In other words, the cumulative
number of bytes transmitted by this source to all connected targets.
conOpsRx The number of operations received by the target. The number of operations that the
target for this connection (as indicated by the IP address field) has received from this
source.
conBytes
Rx The number of bytes received by the target. The number of bytes that the target for
this connection (as indicated by the IP address field) has received from this source.
conResentOpCo
unt The number of operations re-sent because they were not acknowledged
conBytesInDiskQ
ueue The number of bytes in the source disk queue
conBytes
Skipped The number of bytes skipped during a difference mirror. During a difference mirror, if
Storage Mirroring detects that there have been no changes to a file, then it will
indicate the number of bytes it did not send for this file in this field.
conMirror
Bytes
Remaining The number of mirror bytes remaining to be transmitted
conMirror
Percent The percentage of the mirror that has been completed. This field is determined if the
replication set size was calculated.
Category Statistic Description