HP Storage Mirroring V5 Software User Manual
Page 78
6
-
17
2.
To modify the auto-reconnect setting, use the
set
command with the
AutoReconnect
option. The
AutoReconnect
option is set to
1
for enabled or
0
for disabled. By default, auto-reconnect is enabled.
3.
To determine the current auto-remirror setting, use the
get
command with the
AutoRemirror
option.
4.
To modify the Storage Mirroring auto-remirror setting, use the
set
command with the
AutoRemirror
option. The
AutoRemirror
option is set to
1
for enabled or
0
for disabled. By default, auto-remirror is enabled.
Command
SET
Description
The Text Client/DTCL sends a request to Storage Mirroring to modify the value of a Storage
Mirroring program setting. The setting is immediately applied and is then forwarded to the registry
where it is also applied.
Syntax
SET <
option
>=<
value
> [
machine
]
Options
option
—See
Storage Mirroring Text Client program settings
on page 14-11.
value
—See
Storage Mirroring Text Client program settings
on page 14-11.
machine
—Name of the machine
Examples
set netport=1500
set VerifyLogName=”HA server.log”
set DefaultAddress=”129.12.34.3”
Notes
Some settings, although immediately applied to Storage Mirroring, will not take effect until the
client or daemon is restarted. For example, the Text Client must be closed and reopened for a
change to ClientLogName to take effect. And the daemon must be restarted to cause a change in
the modules loaded if the LoadSourceTarget setting is changed. See
Storage Mirroring Text Client
program settings
on page 14-11 for details on each configuration option.
If you do not specify a machine name, the value from the current source will be updated. If you
have not identified an active source, no changes will be made.
Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.