HP Storage Mirroring V5 Software - Manual (Page 36)

3 - 5
Specifying Source and Target Functionality
If you did not specify your machine as a source or target when starting the Storage Mirroring you will need to load the modules
using the DTCL commands
load source or load target
.
To remove a specific functionality, use the unload source or unload target commands.
Command LOAD SOURCE
Description Loads the Storage Mirroring source module
Syntax LOAD SOURCE < machine >
Options machine —Name of the machine
Examples load source indy
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command LOAD TARGET
Description Loads the Storage Mirroring target module
Syntax LOAD TARGET < machine >
Options machine —Name of the machine
Examples load target jersey
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command UNLOAD SOURCE
Description Unloads the Storage Mirroring source module
Syntax UNLOAD SOURCE < machine >
Options machine —Name of the machine
Examples unload source indy
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command UNLOAD TARGET
Description Unloads the Storage Mirroring target module
Syntax UNLOAD TARGET < machine >
Options machine —Name of the machine
Examples unload target jersey
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.