HP Storage Mirroring V5 Software - Manual (Page 38)

3 - 7
3. To determine the current unetport setting, use the get command with the unetport option. The default port number
is 1500.
4. To modify the unetport, use the set command with the unetport option. The unetport option can be any number
from 1025-65535 that you want to assign to the port.
Notes ‹ Some settings, although immediately applied to Storage Mirroring, will not take effect until the
client or daemon is restarted. For example, the Text Client must be closed and reopened for a
change to ClientLogName to take effect. And the daemon must be restarted to cause a change in
the modules loaded if the LoadSourceTarget setting is changed. See
Storage Mirroring Text Client
program settings on page 14-11 for details on each configuration option.
‹ If you do not specify a machine name, the value from the current source will be updated. If you
have not identified an active source, no changes will be made.
‹ Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Storage Mirroring version 4.3
Source Machine: indy (Access Level: FULL)
================================================================================
Command:
================================================================================
> setlocal netport = 1110