HP Storage Mirroring V5 Software - Manual (Page 242)

A - 6
Failover
Get
Get Local
Command FAILOVER
Description Manually initiates the failover process for the specified monitor machine
Syntax FAILOVER < monitor > [ON < target_machine >]
Options ‹ monitor —Name of the source machine designated as the monitor
‹ target_machine —Name of the target machine
Examples failover indy on jersey
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command GET
Description The Text Client/DTCL sends a request to Storage Mirroring to return the value of a Storage
Mirroring program setting. The setting is retrieved by Storage Mirroring from the registry.
Syntax GET < option > [ machine ]
Options ‹ option —See Storage Mirroring Text Client program settings on page 14-11.
‹ machine —Name of the machine
Examples ‹ get netport
‹ get VerifyLogName
‹ get DefaultAddress
Notes ‹ If you do not specify a machine name, the value from the current source will be returned. If you
have not identified an active source, no data will be returned.
‹ Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command GETLOCAL
Description The Text Client/DTCL sends a request directly to the registry, bypassing Storage Mirroring, to
return the value of a Storage Mirroring program setting.
Syntax GETLOCAL < option >
Options option —
Examples ‹ getlocal netport
‹ getlocal VerifyLogName
‹ getlocal DefaultAddress