HP Storage Mirroring V5 Software User Manual

Page 156

12.

Start monitoring by using the

monitor start

command.

13.

If after starting a monitor you need to stop it, use the

monitor stop

command.

Storage Mirroring version 4.3

Source Machine: indy (Access Level: FULL)

- Monitor settings for indy -
Flags: ADD, FAILALL
Target Pre-Failover script: /home/username/prefailover
Target Post-Failover script: /home/username/postfailover
Target Pre-Failback script: /home/username/prefailback
Target Post-Failback script: /home/username/postfailback
Source Post-Failback script: /home/username/srcpostfailback
(press any key)

> monitor script add prefailback "/home/username/prefailback"
> monitor script add postfailback "/home/username/postfailback"
> monitor script add srcpostfailback "/home/username/srcpostfailback"
> monitor display

Command

MONITOR START

Description

The configured failover target starts monitoring the source machine that was designated as the
monitor.

Syntax

MONITOR START <

monitor

> [ON <

target_machine

Options

monitor

—Name of the source machine designated as the monitor

target_machine

—Name of the target machine that will be monitoring the source machine

Examples

monitor start indy on jersey

Notes

Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.

Command

MONITOR STOP

Description

Stops monitoring the source machine for a failure

Syntax

MONITOR STOP <