HP Storage Mirroring V5 Software - Manual (Page 264)

A - 28
Schedule Enable
Schedule End
Command SCHEDULE ENABLE
Description Enables the transmission schedule
Syntax SCHEDULE < target_machine > ENABLE
Options target_machine —Name of the target machine
Examples schedule jersey enable
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command SCHEDULE END
Description Sets criteria to end the transmission of data from the source to the target
Syntax SCHEDULE < target_machine > END [ DURATION = < number > < time_units > ][ BYTES = < bytes > ]
Options ‹ target_machine —Name of the target machine
‹ number —Any number indicating the length of time before the transmission ends
‹ time_units —Minutes ( min ), hours ( hr ), or days ( day )
‹ bytes —Number of bytes transmitted before the transmission ends
Examples ‹ schedule jersey end duration=3 hr
‹ schedule philly end bytes=1500000
Notes ‹ If you use both of the end options, duration and bytes , the transmission will be stopped when
the first end option value is met.
‹ Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.