Storage mirroring text client program settings, Storage mirroring text client program settings -11 – HP Storage Mirroring V5 Software User Manual
Page 218
14
-
11
Storage Mirroring Text Client program settings
The following table contains a complete listing of each Storage Mirroring program setting.
Program Setting
Description
ActivationCode 16-character Storage Mirroring activation code
Values:
Found on registration card, if not an evaluation copy
Default:
n/a
AdapterFlags Specifies the adapter to use when establishing a connection
Values:
(
1
)
Compression
(
2
) Encryption
(
4
) Network Data Representation
Default:
4
Compression is no longer used. This option should not be changed.
Advertisement Indicates how the Management Console populates the server tree
Values:
(
1
)
Uses the Storage Mirroring heartbeat
(
4
) Uses Windows 200x Active Directory
(
5
) Uses both the Storage Mirroring heartbeat and Windows 200x Active Directory
Default:
5
Changes to this setting require the Storage Mirroring
service to be restarted for the change to
take effect. If Active Directory Advertisement is enabled (set to
4
or
5
), there is a 200 byte
impact on the Active Directory service for each server that registers. The Storage Mirroring
service registers with Active Directory at startup and unregisters at shutdown.
AllFailover
Specifies which IP addresses to failover
Values:
(
0
)
Failover only monitored IP addresses
(
1
) Failover all IP addresses
Default:
1
AllMustFail
Specifies whether or not all IP addresses must fail for failover to take place
Values:
(
0
) any IP address can fail
(
1
)All IP addresses must fail
Default:
1
AutoReconnect
Specifies whether to reinstate the target connection(s) when the source machine is brought
online after a source machine failure
Values:
(
0
) Do not reconnect
(
1
) Reconnect
Default: 1
AutoRemirror
Specifies whether to remirror when a source is brought online after an auto-disconnect
Values:
(
0
) Do not remirror
(
1
) Perform a file differences checksum mirror
(
2
) Perform a full mirror
(
3
) Perform a file differences mirror
Default:
1