HP NonStop G-Series - Manual (Page 51)

HP NonStop Storage Management Foundation User's Guide—523562-008
3-1
3
Configuring and Managing SMF
Processes
For D-series RVUs, SMF processes are configured and managed through a
combination of the Configuration Utility Program (COUP) and the Peripheral Utility
Program (PUP). For G-series RVUs, SMF processes are configured and managed
through the Subsystem Control Facility (SCF).
Figure 3-1 illustrates the ability to
configure and manage the SMF environment with COUP and PUP or SCF.
This section contains these topics:

Configuration and Management Overview on page 3-2

Error Management and Reporting on page 3-20

COUP lets you define the process-level attributes of the $ZSMS master process
and storage pool and virtual disk processes. COUP also lets you add and delete
entries for these processes in the system configuration file, OSCONFIG, in addition
to start them, stop them, and inquire about their attributes. COUP commands that
support SMF are described in
Appendix B, COUP and PUP Interfaces .
Figure 3-1. Configuring and Managing SMF Processes
004 CDT .CDD
PUP or SCF
Storage Pool
COUP/PUP or SCF
COUP/PUP or SCF
$ZSMS
Storage Pool
Process
Virtual Disk
Processes
Physical
Volumes