HP NonStop G-Series - Manual (Page 114)

Guardian Procedures
HP NonStop Storage Management Foundation User's Guide—523562-008
8-2
Guardian Procedures Unique to SMF
Guardian Procedures Unique to SMF
The main focus of this section is to provide information for the following Guardian
procedures that operate exclusively on SMF objects:
SMS_GETPOOLSSTART_
SMS_GETPOOLSNEXT_
SMS_GETPOOLSEND_
SMS_GETSTGPOOLHDR_
SMS_GETVIRTDISKSSTART_
SMS_GETVIRTDISKSNEXT_
SMS_GETVIRTDISKSEND_
SMS_GETVIRTUALDISKHDR_
SMS_GETPOOLOFVOLUME_
SMS_GETPHYSVOLSINPOOLSTART_
SMS_GETPHYSVOLSINPOOLNEXT_
SMS_GETPHYSVOLSINPOOLEND_
SMS_GETPHYSVOLINFOFROMPOOL_
SMS_GETPOOLOFVOLUME_
SMS_RELOCATEFILE_
These Guardian procedures are unique to SMF. All the procedures are Waited; they
cannot be initiated in one call and finished later using AWAITIO[X].
Table 8-1
summarizes these procedures, and they are described in detail later in this section, in
alphabetical order by procedure call name. They can be called from either TSN/R
native processes or TNS processes.
Table 8-1. Guardian Procedures Unique to SMF (page 1 of 2)
SMF
Object
To Perform This Operation Use These Guardian Procedure Calls
Storage
pools Discover names of storage
pools on a system and
optionally retrieve configuration
information for each storage
pool SMS_GETPOOLSSTART_
SMS_GETPOOLSNEXT_
SMS_GETPOOLSEND_
Retrieve configuration
information for a particular
storage pool SMS_GETSTGPOOLHDR_
Virtual disks Discover names of virtual disks
on a system or names of virtual
disks associated with a
particular storage pool and
optionally retrieve configuration
information for each virtual disk SMS_GETVIRTDISKSSTART_
SMS_GETVIRTDISKSNEXT_
SMS_GETVIRTDISKSEND_
Retrieve configuration
information for a particular
virtual disk SMS_GETVIRTUALDISKHDR_