Acme PP-32 - Manual (Page 70)

70
PP-32
KOOLMASTER PP-32
REV.01
5.14.5 Setting Time and Date
Set the function to "20.Time / Date" from the main menu using the
navigation buttons. Press the right-arrow key. The current time and
date are displayed.
Press the right-arrow key once. The
year is selected. Use the adjustment
buttons to set the year. Press the
right-arrow key once again, the
month is selected. Use the adjust-
ment buttons to set the month.
Press the right-arrow key. The day is selected. Use the adjustment
buttons to set the day to the proper value.
Press the right-arrow key once again, hours are selected. Use the
adjustment buttons to set the hours. Press the right-arrow key.
Minutes are selected. Use the adjustment buttons to set the minutes.
Press the right-arrow key. Seconds are selected. Use the adjustment
buttons to adjust the seconds.
Press the left-arrow several times, in order to exit this menu.
5.14.6 Relay Assignment
The PP-32 controller has 32 integrated ON/OFF relays. The mapping
between the stages and relays is determined by the user. Fill out the
template at the end of this manual to map the relays before assigning
them from the front panel. Note that relay assignment can only be done
in the installer mode (see sec 5.14.2).
Relays with a mark underneath are
assigned to the selected output. Use the
right and left-arrow keys to scroll the
display and select the desired relay.
HINT: Pressing the UP or DOWN arrow keys acts as a page-up
& page-down function. This makes it easier to step through the
relays.
Time / Date
(Y/M/D)
Date: 2002/10/01
Time: 13:21:01
Heater 1 Relays
1 2 3 4 5 6 7 8 9 10
√