Setting dwr-f-1a's id numbers, Identification numbers, Air inlet modules see also dwr-f-1a – Acme PP-32 User Manual
Page 13: Pp-32
13
PP-32
KOOLMASTER PP-32
REV.01
3. DWR-F-1A COMMUNICATION HOOKUP
If DWR-F-1A air inlet controllers are connected to the PP-32, use id
numbers within the range 4-15. Id numbers 1,2 and 3 are reserved for
another purpose. Refer to section 5.5.1.1 to set the proper ID numbers.
terminal as shown on the wiring diagram. For an alarm of the second
type, use the NO terminal.