FUTEK IHH500 Series - Manual (Page 8)

EM1001-B
- 8 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
Toll Free: (800) 23 FUTEK

Lockout feature to prevent inadvertent changes

Data logging with up to 21,000 points

Supports USB link port

Built-in load cell excitation voltage

Powered by a rechargeable 3000 mAh lithium-polymer battery for up to 24 hours of operation.

Battery/ life indicator with bar graph and text indicators

Selectable automatic display shutoff for period of inactivity (up to 15 minutes)

Selectable latched or non-latched alarm configuration

ASCII Stream Output

Two independently isolated solid state alarm relays, each able to be disabled or enabled
individually, with normally open or closed operations and protected at 110mA/110V

Selectable voltage output as bipolar (± 5 V) or uni-polar (0-5V) with 2.5V offset

Selectable current output as bidirectional and unidirectional

Selectable 0-20mA, 0-25mA, 4-20mA, 5-25mA current output

Selectable alarm configuration (Latched or non-Latched)

Supports Speed (RPM), Angle (Degrees), and Power (W/kW/MW/HP) measurements for rotary
torque sensors with encodes

Provides a +5.000 V (±1 mV) excitation voltage to bridge resistances as low as 30 Ohms and as
high as 30k Ohms with a limited current to 160 mA

Default channel calibrated to 0-4 mV/V using precision BLH

Back lit 4x16 character LCD with selectable brightness, contrast, and auto shut off

Selectable digit height size (4.7 mm and 12.7mm)

Selectable number of digits to be displayed, excluding the decimal point (3, 4, 5, or 6)

Equipped with the diagnostic mode to measure bridge resistance, sensitivity, internal voltage
(Analog and digital), battery and temperature

User friendly navigation menu directs users to enable/disable or select/unselect various features
with easy to follow instructions

Ability to store 14+1 sensor profiles including calibration values such as Offset, Full scale,
Loading point(s) , Engineering unit , Serial number, Sensor type (Bridge, Voltage , Current,
Pulse) , Sensitivity, Alarm limits (High and Low) and all Peak/ Valley (First, Hold, Auto reset)
Threshold values

Active channel number indicator

IP66 housing and connectors

Aluminum enclosure

Lead free/ RoHS compliant parts

ESD, EMI, EFT and short circuit protected Input and output which covers the CE approval
Note: IHH500 is available in two versions, Elite and Pro.