FUTEK IHH500 Series - Manual (Page 12)

EM1001-B
- 12 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
Toll Free: (800) 23 FUTEK
Front Panel
Button
Function of Button
in Menu Mode
Function of Button in Normal Mode
Enter Displays battery life time
▲Arrow
Allows the user to toggle between displaying the tare
and gross values. This can be used to remove any
fixture weights.
Back
Allows the user to toggle between two different size
fonts. This key selects one of the four different states
in normal mode and one of the five different states
when a rotary sensor with an encoder is being
monitored. In this case rpm, torque, angle and
power will be displayed.
◄ Arrow
Allows the user to reset the peak/ valley or angle (in
rotary sensors with an encoder)
N/A Start navigation
► Arrow
Allows the user to toggle between four groups of
engineering units (Force, Torque, Pressure, and
Displacement) and the standard mV/V.
1
Exit
Allows the user to shunt the current reading. The
device shunts a resistor across the -Excitation and -
Signal connections.
2
▼ Arrow
Allows the user to freeze the current reading. HOLD
will be displayed on the LCD showing that it has
been held. When the button or any other key is
pressed, the hold command will be cancelled.
2
ON/OFF ON/OFF