FUTEK IHH500 Series - Manual (Page 44)

EM1001-B
- 44 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
Toll Free: (800) 23 FUTEK
6.1.3.7.2 Full Scale (+)
Scroll to “ FULL SCALE (+) ” from “ CALIBRATION ” using the ▲▼ keys and press ENTER.
If the channel “ DIRECTION ” is defined as “ BI-DIRECTION ” it will be prompt to apply the full scale
calibration (-) as well as zero load (-) for the reverse direction.
6.1.3.7.3 Zero Load (-)
Scroll to “ ZERO LOAD (-) ” from “ CALIBRATION ” using the ▲▼ keys and press ENTER.
6.1.3.7.4 Full Scale (-)
Scroll to “ FULL SCALE (-) ” from “ CALIBRATION ” using the ▲▼ keys and press ENTER.
OPERATION
WAS EXECUTED
SUCCESSFULLY
(HIT ENTER/BACK)
APPLY
FULL SCALE(-)
CALIBRATION
THEN PRESS ENTER
OPERATION
WAS EXECUTED
SUCCESSFULLY
(HIT ENTER/BACK)
APPLY
ZERO LOAD(-)
CALIBRATION
THEN PRESS ENTER
OPERATION
WAS EXECUTED
SUCCESSFULLY
(HIT ENTER/BACK)
APPLY
FULL SCALE(+)
CALIBRATION
THEN PRESS ENTER