FUTEK IHH500 Series - Manual (Page 102)

EM1001-B
- 102 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
Toll Free: (800) 23 FUTEK
6.5.11 Pulse Input (This feature is available in Elite Version only)
Scroll to “ PULSE INPUT ” from “ INTERFACE ” using the ▲▼ keys and press ENTER.
Use the
◄► keys to either disable or enable the Pulse Input.
Depending on the type of sensor defined in the current sensor profile, a warning message will be
displayed when attempting to enable an input type which is not matched with the sensor configuration.
For example, if the active channel is defined as a bridge input the following warning message will appear
on the screen when activating a different input setting:
Whenever the Pulse Input is enabled a check mark showing that this feature is enabled will be seen on
the display.
WARNING!
EXISTING SETTING
MAY BE CHANGED
ACCEPT CANCEL
SELECT DESIRED
ACTIVITY
USING ◄,► KEYS
[ENABLE]
VOLTAGE INPUT
CURRENT INPUT
►PULSE INPUT
----------