FUTEK IHH500 Series - Manual (Page 59)

EM1001-B
- 59 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
Toll Free: (800) 23 FUTEK
6.1.4.1 Sensor Configuration
See the details mentioned in section 6.1.3.1.
6.1.4.2 Direction
See the details mentioned in section 6.1.3.2.
6.1.4.3 Unit selection
See the details mentioned in section 6.1.3.3.
6.1.4.3.1 Force (MASS)
See the details mentioned in section 6.1.3.3.1.
6.1.4.3.2 Torque
See the details mentioned in section 6.1.3.3.2.
6.1.4.3.3 Pressure
See the details mentioned in section 6.1.3.3.3.
6.1.4.3.4 Displacement
See the details mentioned in section 6.1.3.3.4.
6.1.4.3.5 mV/V
See the details mentioned in section 6.1.3.3.5.
6.1.4.4 Sensor Capacity
See the details mentioned in section 6.1.3.4.
6.1.4.5 Sensitivity (+)
See the details mentioned in section 6.1.3.5.
6.1.4.6 Sensitivity (-)
See the details mentioned in section 6.1.3.6.
6.1.4.7 Calibration
See the details mentioned in section 6.1.3.7.
6.1.4.7.1 Zero Load (+)
See the details mentioned in section 6.1.3.7.1
6.1.4.7.2 Full Scale (+)
See the details mentioned in section 6.1.3.7.2