Airedale TurboChill FreeCool 200kW - 1830kW - Manual (Page 54)

54 Chiller Technical Manual 7525355 V1.1.0_04_2013
Te
ch
ni
ca
l
Chillers TurboChill™ Air Cooled and FreeCool
A
ir C
oo
led
13 14 15 16
Mechanical Data Notes Units TCC12R14L-06 TCC12R16L-06 TCC12R18L-06 TCC12R20L-06
Cooling Duty - AC Fans (1) kW 750 800 850 900
Nom Input -Cooling Only kW 216.5 228.8 246.8 262.9
EER (2) 3.46 3.50 3.44 3.42
ESEER (3) 4.78 4.81 4.81 4.78
SEER (3) 4.64 4.66 4.66 4.64
Nominal Output - Free Cooling (4) kW N/A N/A N/A N/A
Ambient when Free Cooling = 100% Nominal DX (5) °C N/A N/A N/A N/A
Cooling Duty - EC Fans (1) kW 750 800 850 900
Nom Input -Cooling Only kW 214.0 226.0 243.6 258.9
EER (2) 3.50 3.54 3.49 3.48
ESEER (3) 5.49 5.57 5.62 5.62
SEER (3) 5.26 5.33 5.38 5.38
Nominal Output - Free Cooling (4) kW N/A N/A N/A N/A
Ambient when Free Cooling = 100% Nominal DX (5) °C N/A N/A N/A N/A
Cooling Duty - High Airflow EC Fans (1) kW 750 800 850 900
Nom Input -Cooling Only kW 213.8 225.8 243.3 258.6
EER (2) 3.51 3.54 3.49 3.48
ESEER (3) 5.49 5.57 5.62 5.61
SEER (3) 5.26 5.34 5.38 5.38
Nominal Output - Free Cooling (4) kW N/A N/A N/A N/A
Ambient when Free Cooling = 100% Nominal DX (5) °C N/A N/A N/A N/A
Capacity Steps (6) % 15-100% 15-100% 15-100% 15-100%
Dimensions (H x W x L) mm 2785 x 2200 x 8286 2785 x 2200 x 9418 2785 x 2200 x 10550 2785 x 2200 x 11682
Machine Weight (7) kg 7120 7755 8355 8975
Operating Weight (7) kg 7365 8010 8610 9235
Construction Material
Base: Plain Galvanised Steel, Panels: Galvanised Sheet Steel,
Epoxy Baked Powder Paint, Light Grey (RAL 7035)
Evaporator - Type Flooded - Shell and Tube Evaporator
Insulation Class O, UV stable Insulation
Total Max. Water Flow l/s 58.8 58.8 58.8 58.8
Total Min. Water Flow l/s 19.4 19.4 19.4 19.4
Condenser - Type Epoxy Coated Aluminium Microchannel & Aluminium Fins
Face Area Total m² 33.2 37.9 42.6 47.4
Maximum Airflow - AC Fans m³/s 79.0 90.3 101.6 112.9
Maximum Airflow - EC Fans m³/s 88.6 101.2 113.9 126.5
Maximum Airflow - High Airflow EC Fans m³/s 95.7 109.3 123.0 136.7
Condenser Fan & Motor Sickle Bladed Axial Fan
Quantity 14 16 18 20
Diameter mm 800 800 800 800
Maximum Speed - AC Fans rpm 910 910 910 910
Maximum Speed - EC Fans rpm 1025 1025 1025 1025
Maximum Speed - High Airflow EC Fans rpm 1100 1100 1100 1100
Compressor - Type Turbocor - Oil Free Compressor
Quantity 2 2 2 2
Capacity Control Variable Frequency Drive (VFD) for Linear Capacity Modulation
Refrigeration Single Circuit
Refrigerant Pre-charged R134a R134a R134a R134a
Charge (Total) CCT1 + CCT2 kg 460 475 480 495
Refrigeration Control Electronic Expansion Valve (EEV)
Water System Grooved Type Coupling and Pipe Assembly
Water Inlet / Outlet DN150 DN150 DN150 DN150
Water Drain / Bleed - Evap inch 1/2 1/2 1/2 1/2
Water Volume l 140.8 219.3 219.3 219.3
Minimum System Water Volume (8) l 1736.5 1921.3 2027.7 2134.1
Max System Operating Pressure Barg 10 10 10 10
Flow Rate l/s 29.7 31.7 33.7 35.7
Pressure Drop kPa 30.4 34.1 37.9 42.0
Technical Data
Mechanical
TCC12R14L-06, TCC12R16S-06, TCC12R18S-06, TCC12R20L-06
(1) Based on AC units performance at 13/7°C return/supply temperatures, 35°C ambient, 100% water.
(2) EER = DX cooling output / (compressor input power + fan input power)
(3) ESEER / SEER based upon unit operating at 12 / 7 °C return / supply temperature, 35°C ambient.
(4) Nominal Free Cooling output at 16/10°C return/supply temperatures, 2°C ambient, 20% ethylene glycol.
(5) Ambient temperature that maximum nominal DX duty can be achieved using Free Cooling only.
(6) This is a nominal figure based on full compressor duty, actual turndown depends on both condensing and evaporating temperatures.
(7) Based on standard unit without options, machine weight includes refrigerant charge, operating weight includes refrigerant charge and water volume.
For unit weights with waterside options fitted please contact Airedale.
(8) For minimum system water volume calculation, refer to Design Features & Information - Minimum System Water Volume Calculations.