Thermo Fisher Scientific CyberScan PC 300 User Manual
Page 66
Instruction Manual PC 300
62
16 ADDENDUM 4: METER FACTORY DEFAULT
S E T T I N GS
Resetting the meter to factory default settings clears all calibration data and most other setup
functions you might have changed. The following settings will remain as you have set them:
•
Temperature unit of measure (°C or °F)
•
The temperature offset calibration value.
NOTE: Conductivity and pH data are cleared separately from each other.
•
To clear pH data, see Sub group P4.0 in Section 7.5.
•
To clear conductivity/TDS data, see Sub group P9.0 in Section 7.9.1.
Type Parameter
Default
Remarks
pH parameters
P1.1
View pH calibration data
––
No calibration data for 1
st
buffer, pH 1.68
P1.2
––
No calibration data for 2
nd
buffer, pH 4.01
P1.3
––
No calibration data for 3
rd
buffer, pH 7.00
P1.4
––
No calibration data for 4
th
buffer, pH 10.01
P1.5
––
No calibration data for 5
th
buffer, pH 12.45
P2.1
View electrode offset
0.00 mV
No offset adjustment
P2.2
View electrode slope
100.0 %
No slope adjustment
P3.1
Ready indicator
Ready On
Ready indicator on; auto endpoint off
P3.2
# pH calibration points
3
3 pH calibration points available (1 – 5 pt range)
P3.3
°C or °F
No default
°C or °F remains as selected
P4.0
pH factory default
No
Retains your current settings
Conductivity and TDS parameters
P5.1
Viewing conductivity or TDS
––
No calibration data for range 1 (see Section 4.4)
P5.2
calibration data
––
No calibration data for range 2 (see Section 4.4)
P5.3
––
No calibration data for range 3 (see Section 4.4)
P5.4
––
No calibration data for range 4 (see Section 4.4)
P5.5
––
No calibration data for range 5 (see Section 4.4)
P6.1
Viewing conductivity or TDS
1.0
No offset for effective cell constant for range 1.
P6.2
Calibration data
1.0
No offset for effective cell constant for range 2
P6.3
1.0
No offset for effective cell constant for range 3
P6.4
1.0
No offset for effective cell constant for range 4
P6.5
1.0
No offset for effective cell constant for range 5
P7.1
Ready indicator
Ready On
Ready indicator on; auto endpoint off
P7.2
°C or °F
No default
°C or °F remains as selected
P7.3
ATC on or off
ATC on
––
P7.4
TDS factor
0.5
Adjustable from 0.4 to 1.0
P8.1
Temperature coefficient
2.1 % per ° C
Adjustable from 0 to 10%
P8.2
Normalization temperature
25° C
Adjustable from 15 to 30° C
P9.0
Conductivity factory default
No
Retains your current settings