beautypg.com

Thermo Fisher Scientific CyberScan PC 300 User Manual

Page 10

background image

Instruction Manual PC 300

6

To connect the conductivity/temperature probe:

1.

Line up the notch and 6 pins on the probe connector with the holes in the connector

located on the top of the meter. Push down and screw the metal sleeve to lock the probe

connector into place. See Figure 4.

2.

To remove probe, unscrew the metal sleeve and slide up the probe connector. While

holding onto metal sleeve, pull probe away from the meter.

NOTE: Follow the same directions to connect an optional separate temperature element.

CAUTION: Do not pull on the probe cord or the probe wires might disconnect.

Figure 4: Connecting pH and conductivity/temperature probes