beautypg.com

Thermo Fisher Scientific CyberScan PC 300 User Manual

Page 32

background image

Instruction Manual PC 300

28

6 H O L D

F UN C T I O N

This feature lets you freeze the display for a delayed observation. HOLD can be used any time

in MEAS mode.

1.

To hold a measurement, press the HOLD key while

in measurement mode. “HOLD” will appear on the

display.

2.

To release the held value, press the HOLD again.

Continue to take measurements.

NOTE:

This meter shuts off automatically after 20 minutes of last key press.

If the meter is shut off either automatically or manually, the HOLD value will be lost.

Your meter has an auto endpoint feature. When this feature is switched on, and

when a reading is stable for more than 5 seconds, the display will automatically

“HOLD” the reading. The “HOLD” indicator appears. Press the HOLD key to release

the reading. To switch on or off the auto endpoint feature, see SETUP program P3.1

in Section 7.4 for pH and SETUP, program P7.1 in Section 7.8 for conductivity/TDS.

Figure 24 - HOLD function