Thermo Fisher Scientific CyberScan PC 300 User Manual

Page 37

Instruction Manual PC 300

SETUP in TDS Measurement Mode

P5.0: View previous calibration data

P5.1

First range calibration point (0.00 – 9.99 ppm)

P5.2

Second range calibration point (0.0 – 99.9 ppm)

P5.3

Third range calibration point (0 – 999 ppm)

P5.4

Fourth range calibration point (0.00 – 9.99 ppt)

P5.5

Fifth range calibration point (0.0 – 200 ppt)

Instructions in Section 7.6.

P6.0: View electrode data

P6.1 Effective cell constant for first range

(0.00 – 9.99 ppm)

P6.2 Effective cell constant for second range

(0.0 – 99.9 ppm)

P6.3 Effective cell constant for third range (0 – 999 ppm)

P6.4 Effective cell constant for fourth range

(0.00 – 9.99 ppt)

P6.5 Effective cell constant for fifth range

(0.0 – 200 ppt)

Instructions in Section 7.7.

P7.0: Unit configuration

P7.1

READY indicator and auto endpoint function –
select on or off

P7.2

Select °C or °F

P7.3

Select Automatic or Manual Temperature
Compensation

P7.4

Setting TDS conversion factor

Instructions in Section 7.8.

P8.0: Temperature

P8.1

Adjusting temperature coefficient

P8.2

Adjusting normalization temperature

Instructions in Section 7.9.

P9.0: Reset to factory defaults

P9.0

Reset meter to factory defaults

Instructions in Section 7.9.1.