KYORITSU 6305 Instruction Manual - Manual (Page 78)

6.13
KEW6305
6-4-3 Parameters recorded
● Parameters saved (depending on each wiring configuration)
Following parameters are saved.
Measurement/ calculation parameter
Voltage (RMS) Vi : Voltage per phase
Current (RMS) Ai : Current per phase
Active power P : Total active power Pi : Active power per phase
Reactive power Q : Total reactive power Qi : Reactive power per phase
Apparent power S : Total apparent power Si : Apparent power per phase
Power factor PF : Power factor of whole system PFi: Power factor per phase
Frequency f : Frequency of V1
Neutral current In : Neutral Current
* i = 1, 2, 3
● File format and name
Data is saved in KEW format, and the file name is assigned automatically as follows:
File name ： 5 O – 0 0 1 . KEW
1: Manual saving
2: Auto-saving (using Timer function)
Fixed no.
SD: SD card
ME: Internal memory
File no. (001 – 999)