KYORITSU 6305 Instruction Manual - Manual (Page 74)

6.9
KEW6305
6.3 Customizing the display
The displayed parameters in the upper/middle/lower rows of Screen 1 and 2
can be customized. Screen 3 cannot be customized.
● Example
Displayed
at: Before customizing (*) After customizing
Upper V : Voltage P : Active power
Middle A : Current PF : Power factor
Lower P : Active power A : Current
Screen 1
Example
Screen 2
Upper P : Active power f : Frequency
Middle S : Apparent power A : Current
Lower PF : Power factor P : Active power
* It is the start up screen or the previously customized screen that is displayed here. After system reset the
start up screen is displayed. In the above example, start-up screen is displayed.