KYORITSU 6305 Instruction Manual User Manual
Page 105

KEW6305
8.8
● Displayed items
Target demand value (W) > It is set at “Setting 15”. Set the desired value. Predicted demand value (W) > Predicted values of average electrical power (demand values) which will be after the elapse of Present demand value (W) > This is the Present Demand Value(see definitions) Remaining time > This is the count down, in 1 sec. decrements to the end of the interval. Load factor (%) > This is the load factor(See definitions) Date and time > These are the time and when the max. demand recorded so far from the start of the survey was Max. demand value (W) > The max. demand value measured between the beginning and the end of
demand measurement interval with present loads are displayed right after starting a measurement.
The predicted values are calculated successively when loads vary.
measured.
measurement is displayed.
- 1009 (13 pages)
- 1011 (12 pages)
- 1012 (12 pages)
- 1018 (1 page)
- 1030 (1 page)
- 1061 (58 pages)
- 1051 (40 pages)
- 1109S (36 pages)
- 1110 (1 page)
- 2000 (1 page)
- 2002PA (27 pages)
- 2007A (1 page)
- 2009R (33 pages)
- 2012R (2 pages)
- 2017 (1 page)
- 2031 (1 page)
- 2033 (9 pages)
- 2040 (2 pages)
- 2046R (2 pages)
- 2200 (3 pages)
- 2210R (1 page)
- 2300R (1 page)
- 2413F (24 pages)
- 2413R (24 pages)
- 2431 (2 pages)
- 2432 (1 page)
- 2433R (1 page)
- 2434 (10 pages)
- 2500 (1 page)
- 2608A (2 pages)
- 3005A (24 pages)
- 3021 (24 pages)
- 3121A (12 pages)
- 3126 (28 pages)
- 3127 (60 pages)
- 3128 (88 pages)
- 3131A (20 pages)
- 3132A (20 pages)
- 3161A (24 pages)
- 3321A (24 pages)
- 4105A (10 pages)
- 4106 (48 pages)
- 4116A (20 pages)
- 4140 (32 pages)
- 4200 (24 pages)