KYORITSU 6305 Instruction Manual - Manual (Page 41)

KEW6305
4.14
“Setting 12” Time period setting (Date setting)
Following explains how to set recording start / stop date.
1 Use the Cursor key on the selection screen, and select “Setting 12”.
2 Press the ENTER key to get the instrument into setting change mode.
3 Then day for recording stop date will blink.
4 Press the Cursor Key and select any desired date.
5 Then press the ENTER key after making necessary change.
* Start date is displayed on the upper line and stop date is on the lower line.
Example:
When recording start / stop time and date have been set as follows,
Setting 11 (time) = 8:00:00 - 18:00:00
Setting 12 (date) = 12.08.01 - 12.08.07
the instrument automatically performs recording at the following time and date.
1. 8:00 to 18:00 on August 1, 2012,
2. 8:00 to 18:00 on August 2, 2012,
3. 8:00 to 18:00 on August 3, 2012,
4. 8:00 to 18:00 on August 4, 2012,
5. 8:00 to 18:00 on August 5, 2012,
6. 8:00 to 18:00 on August 6, 2012 and
7. 8:00 to 18:00 on August 7, 2012.
NOTE:
This setting item will not be displayed if Setting 10 has been set to “OFF”.