KYORITSU 6305 Instruction Manual User Manual
Page 51
KEW6305
4.24
“Setting 22” System reset
Following explains how to perform system reset to restore all the settings to the default.
For further details about system reset, please refer to “Section 11: Additional functions” in this
manual.
1 Use the
Cursor
key on the selection screen, and select “Setting 22”.
2 Then press the
ENTER
key to get the instrument in setting change mode.
3 The message “OFF”(not reset) will blink. Change it to “ON”(reset) with
Cursor
key.
4 When pressing the
ENTER
key, system reset will start.
* The setting will return to “OFF” when system reset is done.
See also other documents in the category KYORITSU Tools:
- 1009 (13 pages)
- 1011 (12 pages)
- 1012 (12 pages)
- 1018 (1 page)
- 1030 (1 page)
- 1061 (58 pages)
- 1051 (40 pages)
- 1109S (36 pages)
- 1110 (1 page)
- 2000 (1 page)
- 2002PA (27 pages)
- 2007A (1 page)
- 2009R (33 pages)
- 2012R (2 pages)
- 2017 (1 page)
- 2031 (1 page)
- 2033 (9 pages)
- 2040 (2 pages)
- 2046R (2 pages)
- 2200 (3 pages)
- 2210R (1 page)
- 2300R (1 page)
- 2413F (24 pages)
- 2413R (24 pages)
- 2431 (2 pages)
- 2432 (1 page)
- 2433R (1 page)
- 2434 (10 pages)
- 2500 (1 page)
- 2608A (2 pages)
- 3005A (24 pages)
- 3021 (24 pages)
- 3121A (12 pages)
- 3126 (28 pages)
- 3127 (60 pages)
- 3128 (88 pages)
- 3131A (20 pages)
- 3132A (20 pages)
- 3161A (24 pages)
- 3321A (24 pages)
- 4105A (10 pages)
- 4106 (48 pages)
- 4116A (20 pages)
- 4140 (32 pages)
- 4200 (24 pages)