KYORITSU 6305 Instruction Manual - Manual (Page 134)

13.5 KEW6305
Duration of integration
Displayed item 00:00:00 (hour: minute: second)
Display range 00:00:00 (0 sec.) - 99:59:59 (99-hour 59-min 59-sec)
to 000100 - 999999 (999999-hour)
*Display changes as above.
13.4 Demand measurement (
DEMAND Range)
(1) Target value (T
DEM
)
Display range Preset value will be displayed and not vary. (0.1W - 999.9GW)
(2) Predicted value (G
DEM
)
Display range Decimal position and unit are the same as T
DEM
.
0 to 999999dgt (“OL” will be displayed if exceeding this range.)
Equation
(3) Demand value (present value) (ΣDEM)
Display range Decimal position and unit are the same as T
DEM
.
0 to 999999dgt (“OL” will be displayed if exceeding this range.)
Equation
, if
∑
Σ = Σ
DEMi DEM
1 = i
(1P2W×1)
2 = i
(1P2W×2，1P3W，3P3W)
3
=
i
(1P2W×3，3P3W3A，3P4W)
(4) Load factor
Display range 0.00 to 9999.99% (“OL” will be displayed if exceeding this range.)
Equation
DEM
T
DEM
Σ
13.5 Other specifications
(1)AC power supply
Voltage range AC100～240V±10%
Frequency 45～65Hz
Power consumption
10VA max
(2)DC power supply
Type LR6: size AA (alkaline) battery x 6 pcs
Rated voltage DC9V (＝1.5V×6)
Current consumption 110mA typ.(@9V)
Battery life approx. 15 hours (standard use, Bluetooth: OFF, Backlight: OFF)
erval demand of beginning from Period
erval Demand
DEM G
DEM
int
int
× Σ =
( )
erval Demand
hour
erval demand of beginning from WP DEM
int
1
int
× + = Σ