KROHNE IFC 110 Converter - Manual (Page 9)

Part A System installation and start-up Sect. 1.3.2
05/2003 IFC 110 F 9
1.3.2 Stripping (preparation) of signal cables
Please note: The numbers in the drawings designate the stranded drain wires of signalling cables
A and B, see sectional drawings in Sect. 1.3.1.
Flow sensor Converter
Length flow sensor Length Converter
mm inch mm inch
a 90 3.60 a 50 2.00
b 8 0.30 b 8 0.40
c 25 1.00 d 8 0.40
d 8 0.30 e 20 0.80
e 70 2.80
Signal cable A (type DS),
double shielding
for flow sensor
Signal cable A (type DS),
double shielding
for IFC 110 F Converter
Signal cable B (type BTS),
with triple shielding (bootstrap)
for flow sensor
Signal cable B (type BTS),
with triple shielding (bootstrap)
for IFC 110 F Converter
Customer-supplied materials
W Insulation tubing (PVC), Ø 2.0-2.5 mm (Ø 1”)
X Heat-shrinkable tubing or cable sleeve
Y Wire end sleeve to DIN 41 228: E 1.5-8
Z Wire end sleeve to DIN 41 228: E 0.5-8
Signal cable A
bending radius
≥ 50 mm (≥ 2”)
Signal cable A
bending radius
≥ 50 mm (≥ 2”)
Signal cable B
bending radius
≥ 50 mm (≥ 2”)
Signal cable B
bending radius
≥ 50 mm (≥ 2”)