KROHNE IFC 110 Converter - Manual (Page 101)

Part E Index Sect. 14
05/2003 IFC 110 F 101
Keyword Sect. No. Fct. No. Keyword Sect. No. Fct. No.
K Range setting 4.4, 5.1
Keys 4.1-4.3 Rating plate page 4 3.02
Key combinations for Replacement
– deleting errors 4.6 – electronic unit 8.3, 8.4, 8.7
– entering the setting level 4.1-4.3 – power supply fuse(s) 8.1
– leaving the setting level 4.1-4.3 Resetting of totalizer 4.6
– resetting the totalizer 4.6 Return of signal converter (form) page 107
Return to
L – – function level 4.1-4.3
Language of display texts 4.4, 5.11 3.01 – – main menu level 4.1-4.3
LCD display 4.2, 4.4, 5.4 – – measuring mode 4.1-4.3
Light-emitting diode (LED) 3, 4.2, 8.7 – – submenu level 4.1-4.3
Limit (indicator) 2.4, 2.6, 5.19 1.07-1.10 Reverse flow (R) 4.4, 5.15 1.04-1.07, 3.02
Line voltage see power supply RS 232 adapter 6.4.1
Low-flow cutoff (SMU) 4.4, 5.3 1.03 RS 485 interface 6.4.3
M S
Magnetic field frequency 4.4, 5.13 3.03 S = status output 2.4, 4.4, 5.8 1.07-1.10
Magnetic sensors 4.2, 6.2, 8.2 Selfcheck 4.4, 7.4 3.07
Main menu level 4.1 1.00, 2.00, 3.00 Setting level 4.1 1.00 et seq.,
Main menus 4.1-4.3 1.00, 2.00, 3.00 2.00 et seq. +
Measuring principle 11 3.00 et seq.
Menu 4.1, 4.4 Signal converter
Meter size (DN) 4.4, 5.13 3.02 – connect. and operation parameters 4.2, 8.7
MP magnetic sensors 4.2, 6.2, 8.2 – connection of power supply 2.1
– error limits 10.1
N – functional checks 7.1-7.5, 7.7
Noise suppression 6.6 – instrument nameplate page 4
Number format of display 5.4, 5.5 1.04 – location 1.1
– operation/operator control 4.1-4.3
O – power input 10.1
Off value for low-flow cutoff (SMU) 5.3 1.03 – power supply fuses 8.1, 9
On value for low-flow cutoff (SMU) 5.3 1.03 – PCBs
Option(al) = supplementary equipment 6.2, 6.4, 10.1 – spare parts 9
Order numbers 9 – technical data 10.1-10.3
Overflow (display) 5.4 1.04 Signal lines A and B 1.3.1 et seq.
Overrranging Simulator GS 8 A 7.7
– I (current output) 2.2, 2.6, 5.6 1.05 SMU = low-flow cutoff 4.4, 5.3 1.03
P (pulse outputs) 2.3, 2.6, 5.7 1.06, 1.07 Software 6.4
Spare parts see Order numbers 9
P Start-up 3
P = pulse outputs 2.3, 4.4, 5.7 1.06, 1.07 Status output 2.4, 4.4, 5.8 1.07-1.10
PCB = printed circuit board 8.7 Submenu level 4.1-4.3
PC software 6.5
PE = protective conductor 1.1, 1.2 T
1.3.3, 1.3.5 T = time constant 5.2 1.02
1.3.6 Technical data
Power driver 8.6 3.07 – dimensions and weights 10.3
Power supply – error limits 10.1
– connection 2.1, 10.1 – signal converter 10.1, 10.2, 10.3
– failure 4.5, 7.7 Terminals 2.1, 2.6, 5.18 3.07
– frequency 2.1, 10.1 (1.06, 1.07)
– input 10.1 Tests see functional checks 7.1 et seq.
– internal 2.1, 2.6, 5.10 Time constant (T) 5.2 1.02
– voltage 2.1, 10.1 Totalizer (internal, electronic) 5.4 1.06
Printed circuit board (PCB) 8.7
Program configuration 4.1 U
Programming range (entry in) 4.1-4.3 Unit
Protective conductor PE 1.1, 1.2 – display 4.4, 5.5 1.04
1.3.3, 1.3.5 – flow 4.4, 5.1 1.01
1.3.6 – pulse output 4.4, 5.7 1.06, 1.07
Pulsating flow 6.5, 6.6, 6.7 3.06 Unsteady display, outputs 6.6
Pulse User-defined unit 4.4, 5.14 3.05
– duration (width) 4.4, 5.7 1.06, 1.07
– outputs P 4.4, 5.7 1.06, 1.07 V
– per volume 4.4, 5.7 1.06, 1.07 v = flow velocity 4.4, 5.1 3.03
– per time 4.4, 5.7 1.06, 1.07 VDE standards page 5,
– width 4.4, 5.7 1.06, 1.07 1.1 et seq.
Pulse output (frequency output) 2.3, 5.7 1.06, 1.07 2.1 et seq.
Q W
Q = flow rate 4.4 + 5.1 1.01, 3.02 Weights (dimensions) 10.3
Q100% 4.4 + 5.1 1.01, 3.02
Z
R ZD = intermediate connection box 1.4, 10.3
R = reverse flow 4.4, 5.15 1.04-1.07, 3.02 Zero check (setting) 7.1 3.03
Range change
– automatic 2.6, 5.20 1.06, 1.07-1.10
– external 2.6, 5.20 1.06, 1.07-1.10