KROHNE CORIMASS G-MFM 4085 EN - Manual (Page 31)

31
4.4 Table of programmable functions
Fct. No. Text Description and settings
1.0 OPERATION Main menu 1.0 Operation
1.1.0 BASIS.PARAM Submenu 1.1.0 Base data
1.1.1 ZERO SET Zero adjustment. See Fct. 3.1.1
1.1.2 L.F. CUTOFF Low flow cutoff. See Fct. 3.1.2
1.1.3 TIME CONST. Signal converter time constant. See Fct. 3.1.3
1.1.4 STANDBY Switching between measuring operation
and standby. See Fct. 3.1.4
1.2.0 DISPLAY Submenu 1.2.0 Display
1.2.1 CYCL.DISP Switching between steady display and cyclic display
1.2.2 STATUS MSG Selects which status messages should be displayed
1.2.3 MASS FLOW Unit for mass flow. See Fct. 3.2.3
1.2.4 MASS TOTAL Unit for mass total. See Fct. 3.2.4
1.2.5 DENSITY Unit for density. see Fct. 3.2.5
1.2.6 TEMPERAT Unit for temperature. see Fct. 3.2.6
1.2.7 VOLUME.FLOW Unit for volume flow. See Fct. 3.2.7
1.2.8 VOLUME.TOTAL Unit for volume total. See Fct. 3.2.8
1.2.9 CONC.MEAS Parameters for concentration measurement. See
separate concentration measurement instruction manual
1.2.10 CONC.MEAS See 1.2.9
1.2.11 CONC.MEAS See 1.2.9
1.3.0 CUR.OUTP. I Submenu 1.3.0 Current output I.
1.3.1 FUNCTION I Function current output I. see Fct. 3.3.1
1.3.2 MIN.VALUE
*
Minimum range for current output I see Fct. 3.3.3
1.3.3 MAX.VALUE
*
Maximum range for current output I see Fct. 3.3.4
1.4.0 PULS.OUTP. P Submenu 1.4.0 Pulse, frequency output P. see Fct. 3.4.0
1.4.1 FUNCTION P Select. Parameter to be totalized
1.4.2 PULSE/MASS * Select. Pulse per unit
1.4.3 PULSE WIDTH * Select pulse width in milliseconds
1.5.0 ALARM.OUT.A Submenu 1.5.0 Process alarm output A. see Fct. 3.5.0
1.5.1 FUNCTION A Select alarm function. See Fct. 3.5.1
1.5.2 ACTIV.LEVEL Select. active high or low. See Fct. 3.5.2
* Exact display depends on selected function. See sub-menu 3.3.0