KROHNE CORIMASS G-MFM 4085 EN - Manual (Page 105)

105
If you need to return flow meters for testing or repair to KROHNE
Your CORIMASS mass flow meter
– has been wet calibrated in an accurate
flow meter test rig.
If installed and operated in accordance with
these operating instructions, your flow
meter will rarely present any problems.
Should you nevertheless need to return a
CORIMASS flow meter for checkout or
repair, please pay strict attention to the
following points:
Due to statutory regulations concerning
protection of the environment and the
health and safety of our personnel, Krohne
may only handle, test and repair returned
flow meters that have been in contact with
liquids if it is possible to do so without risk
to personnel and environment. This means
that Krohne can only service your flow
meter if it is accompanied by a certificate in
line with the following model confirming that
the flow meter is safe to handle.
If the flow meter has been operated with
toxic, caustic, flammable or water-
endangering liquids, you are kindly
requested
– to check and ensure, if necessary by
rinsing or neutralising, that all cavities
in the flow meter are free from such
dangerous substances. (Directions on
how you can find out whether the
primary head has to be opened and
then flushed out or neutralised are
obtainable from Krohne on request.)
– to enclose a certificate with the flow
meter confirming that the flow meter is
safe to handle and stating the liquid
used.
Krohne regret that they cannot service your
flow meter unless accompanied by such a
certificate.
SPECIMEN certificate
Company: ................................................. Address: ......................................................
Department: .............................................. Name: .........................................................
Tel. no.: ....................................................
The enclosed Coriolis mass flow meter
CORIMASS, Type: .................................... Krohne order no. or series no.: .....................
has been operated with the following liquid:
...................................................................
Because this liquid is water-endangering */toxic */caustic */flammable * we have:
– checked that all cavities in the flow meter are free from such substances*
– flushed out and neutralised all cavities in the flow meter *
(*delete if not applicable)
We confirm that there is no risk to man or environment through any residual liquid contained in
this flow meter.
Date: .........................................................
Company stamp:
Signature: ....................................................