Triton 9610 Operation Manual - Manual (Page 51)

TRITON SYSTEMS, INC. 5-9
OPERATION MANUAL - MODEL 9610 SECTION 5 - MANAGEMENT FUNCTIONS
F
UNCTION
: CHANGE SCHEDULE
F
ACTORY
D
EFAULT
: N/A
A CCESS I NSTRUCTIONS :
1.) Select CLOSE from the MANAGEMENTFUNCTION screen.
2.) Select SCHEDULE CLOSE.
3.) Select CHANGE SCHEDULE.
D ESCRIPTION :
This function is used to set the time, in hours and minutes, at which
the terminal will automatically initiate contact with the processor
and perform a close operation. The time is entered in the form
‘HH:MM:SS’ (hours, minutes, seconds). Do not enter the ‘:’ char-
acters separating the fields, just the fields themselves.
Press the ‘2’ key on the keypad to change the AM/PM setting to
‘AM’; press the ‘7’ key to change the setting to ‘PM.’
Press CLEAR to erase everything and start over. Press the BACK-
SPACE key to back up and erase a single character. Press QUIT
to escape without doing anything. Press SET TIME to load the
entered time into the clock.
The Cash Dispenser will not let you enter an invalid number for
hours or minutes. The clock will properly handle the rollover to the
year 2000.
E
RROR
C
ONDITIONS
:
There are no error conditions directly associated with this function.