Primary alarm number – Triton 9610 Operation Manual User Manual
Page 146
TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONS
OPERATION MANUAL - MODEL 9610
5-104
F
UNCTION
: PRIMARY ALARM NUMBER
F
ACTORY
D
EFAULT
: NONE
A
CCESS
I
NSTRUCTIONS
:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Choose MORE.
4.) Select TRITON CONNECT.
5.) Select ALARM NUMBERS.
6.) Choose PRIMARY.
D
ESCRIPTION
:
The PRIMARY ALARM NUMBER function is used to enter the tele-
phone number that the terminal can use for calling a Triton Con-
nect Host Computer to report alarm conditions.
NOTE: If no primary alarm number is entered, the terminal will
default to the PRIMARY TRITON CONNECT NUMBER when plac-
ing alarm-initiated calls.
When this function is selected, the current phone number is dis-
played (if nothing appears on the screen, no number is set). Se-
lect CHANGE to blank the current entry, and then enter the de-
sired phone number. The phone number may be up to 30 digits
long. It can also contain a dialing prefix, such as a ‘9’ for an out-
side line, if necessary. If you need to pause after the prefix, place
a comma in the number for a two-second delay at that point. Press-
ing the
the long distance prefix ‘1’ if you are dialing an 800 number or a toll
long distance number. Do not enter dashes in the number.
E
RROR
C
ONDITIONS
::
There are no error conditions directly associated with this function.