Triton 9610 Operation Manual - Manual (Page 14)

TRITON SYSTEMS, INC.
SECTION 1 - INTRODUCTION OPERATION MANUAL - MODEL 9610
1-4
DATAPAK 3000 Communications Protocol Sup-
port
ATM Software Release 4.1 is DATAPAK 3000 protocol-compliant.
This new capability enables the ATM to interface with designated
DATAPAK intermediaries (in the Canadian market region), who in
turn provide connectivity to the appropriate transaction processor.
NOTE: This feature is only available for use in the Canadian mar-
ket.
DATAPAK 3000 connectivity is typically faster and more cost-ef-
fective than a direct dial-up connection between the ATM and the
transaction processor.
Standard Features of the Single-Cassette Cash
Dispenser
The following paragraphs provide descriptions of the standard fea-
tures of the Cash Dispenser.
Close Scheduling
This function enables the operator of the terminal to establish a
time at which the terminal will automatically initiate a close opera-
tion with the processor. If only manual initiation of a close is de-
sired, this feature can be turned off.
Exit Message
This feature allows a message to be displayed to the customer at
the conclusion of a transaction. The content of the message is
determined by the operator.
Predial Capability
By initiating the call to the processor immediately after the PIN is
keyed in, the actual transaction, once selected, can be completed
more quickly. If desired, the predial capability can be disabled, in
which case the call to the processor will not be made until after the
customer actually chooses a transaction.
Alarm Thresholds
NOTE: This feature must be used in conjunction with Triton Con-
nect version 3.0 or later.
This feature enables the terminal to detect and automatically re-
port the following conditions to a remote personal computer (PC)
that is running Triton Connect (version 3.0 or later):