Triton 9610 Operation Manual - Manual (Page 110)

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONS OPERATION MANUAL - MODEL 9610
5-68
F
UNCTION
: LOW CURRENCY
F
ACTORY
D
EFAULT
: ENABLED
A CCESS I NSTRUCTIONS :
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Select CASSETTE SETUP.
4.) Choose the LOW CURRENCY option.
D ESCRIPTION :
This function is used to enable or disable low currency checking
on the dispenser mechanism. If LOW CURRENCY CHECKING is
ENABLED, the Cash Dispenser will go out of service (it will display
an ERROR 182) when the cash cassette gets down to approxi-
mately 60 notes. Enabling LOW CURRENCY CHECKING will pre-
vent the need for reversals because there will never be a partial
dispense.
If LOW CURRENCY CHECKING is DISABLED, the Cash Dis-
penser will not go out of service until the cassette is completely
empty. This may result in the need to reverse the last withdrawal
due to a partial dispense occurring. In the event of a partial dis-
pense, or no dispense, the terminal will automatically inform the
Processor and the customers account will be correctly credited.
The record of the successful reversal will be recorded in the jour-
nal record.
E RROR C ONDITIONS :
When the cassette runs out of money during a dispense operation
an Error Code 33 (feed failure) will be displayed and the terminal
will go out of service. If the error condition is reset with less than
about 1/2” to 3/4” of bills in the cassette an error code 182 will be
displayed (even with LOW CURRENCY CHECKING disabled). To
avoid this the Cash Dispenser must be reset with the cassette out
of the dispenser, or more than 60 bills must be loaded into the
cassette.
**NOTE**
If the cassette runs out of currency during a dispense, the terminal
will generate another call to the processor to reverse the amount
not dispensed. Do not reset or turn off the terminal during this
call. Doing so will cause the reversal to fail and result in an out of
balance condition.