Triton 9610 Operation Manual - Manual (Page 147)

TRITON SYSTEMS, INC. 5-105
OPERATION MANUAL - MODEL 9610 SECTION 5 - MANAGEMENT FUNCTIONS
F
UNCTION
: BACKUP ALARM NUMBER
F
ACTORY
D
EFAULT
: NONE
A CCESS I NSTRUCTIONS :
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Choose MORE.
4.) Select TRITON CONNECT.
5.) Select ALARM NUMBERS.
6.) Choose BACKUP.
D ESCRIPTION :
The BACKUP ALARM NUMBER function is used to enter a backup
telephone number that the terminal can use for calling a Triton
Connect computer to report alarm conditions.
When this function is selected, the current phone number is dis-
played (if nothing appears on the screen, no number is set). Se-
lect CHANGE to blank the current entry, and then enter the de-
sired phone number. The phone number may be up to 30 digits
long. It can also contain a dialing prefix, such as a ‘9’ for an out-
side line, if necessary. If you need to pause after the prefix, place
a comma in the number for a two-second delay at that point. Press
the key, then the <0> key, followed by the ROW> key to select the comma character. Make sure to enter the
long distance prefix ‘1’ if you are dialing an 800 number or a toll
long distance number. Do not enter dashes in the number.
E RROR C ONDITIONS :
There are no error conditions directly associated with this function.