Triton 9610 Operation Manual - Manual (Page 134)

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONS OPERATION MANUAL - MODEL 9610
5-92
F
UNCTION
: DIAL MODE
F
ACTORY
D
EFAULT
: ‘DTMF’
A CCESS I NSTRUCTIONS :
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Select TELEPHONE.
4.) Select the MODEM SETUP option.
5.) Select DIAL MODE.
D
ESCRIPTION
:
The modem is configured to dial in either the touch-tone mode
(DTMF), or in the rotary (PULSE) mode. Consult with the local
phone company to determine which option is supported. After
selecting the dial mode, be certain to execute the RESET/TEST
MODEM function. The new dial mode does not take effect until
you do this. The factory default for the function is DTMF.
E RROR C ONDITIONS :
If the local phone exchange does not support touch-tone, and the
terminal is configured for DTMF mode, no calls will be completed.
Rotary will work on touch-tone systems, but should not be used if
touch-tone is available. Rotary mode will dial much slower than
DTMF.