Triton 9610 Operation Manual - Manual (Page 26)

TRITON SYSTEMS, INC.
SECTION 2 - BASIC OPERATION OPERATION MANUAL - MODEL 9610
2-4
The key can be used to clear an entry and start over.
The key will abort the current transaction.
The keys located beside the display are called the Screen Keys.
They are used in the selection of menu functions. A Screen Key is
only active when a function or menu option name is displayed be-
side the key.
Accessing Management Functions
You can enter the terminal MANAGEMENT FUNCTIONS main
menu screen by performing any one of the three procedures listed
below:
1. If the Customer Welcome screen is being displayed, press and
hold down the key; while holding down the
key, press the <1> key. Release both keys. After a moment
the Top Menu screen (shown in Figure 2-1) will be displayed.
Select the MANAGEMENT FUNCTIONS option.